1.WX-680A is high performance steel rule auto bending machine. It is special designed for high level dies as cigarette,medicine,high level boxes dies.
2.WX-680A special design for bend-cut combination mold,improve the auto bending machine processing speed.reduce the traditional auto bender bend-cut separated brings problem.
3.Stable rule feeding system. Steel rule anti-stuck design, automatically stop feeding when rule get stuck.
4.Equip with servo motor and energy saving turbine motor, stable and good performance.
| Technical parameters | |
| Nothing thickness range: | 0.45mm-0.71mm |
| Nothing height range: | 8mm-30mm |
| Double saw blade dot blade height: | 23.8mm-30mm |
| Double saw blade dot blade thickness | 0.53mm-1.05mm |
| Support grinding head and tail hypotenuse range: | Software set the starting Angle arbitrary grinding hypotenuse |
| Range of flat groove supporting sharp corner: |
Include Angle 90 -180 degrees automatic identification slot Default flat width: 2mm software can be widened |
| Maximum unslotted bending Angle: | 100 ° |
| Minimum bending size of head and tail: | 1.5mm to 2 mm Depending on the blade thickness |
| U type minimum slot spacing: | Blade thickness +1mm or more |
| U-shaped minimum bending spacing: | Spacing 5mm(5mm above dimensions Software automatically releases back corner bending) |
| Minimum shear size of head and tail: | 1mm |
| Cutting mode: |
Multi-function scissors, can cut head and tail waste It can automatically judge the shearing in both directions at one time, and pull back to shear when the shear level is insufficient |
| One-time shear blade range: |
Height: 8mm-32mm (40 customized) Thickness: 0.53 mm to 1.05 mm |
| Feeding accuracy: | ±0.05mm |
| Flatness of bending: | ±0.5 mm |
| Support bending blade height: | 8 mm -32 mm (40 customized) |
| Supported bending blade thickness: | 0.45 mm -1.07 mm |
|
Bridge width dimensions: Size of olecranon: |
Width optional: 3mm to 6mm Bridge height manual adjustment rod adjustment Software according to the bridge width support automatic wide |
| Best graphics format: | dxf.ai.dwg |
| Equipment environment: | Ventilated, dry below 40 degrees |
| Equipment pressure requirements: | 4Kg/cm2 pressure, 10mm throat diameter |
| Power supply requirements: | AC:220V 50Hz must be properly grounded |
| Machine power: | 3.5kw |
| Weight of whole machine including wooden case: | Machine 950KG lifting tool tray 250KG |
| Equipment outline, cover area and wooden box size: |
280cm×75cm×165cm (footprint) 165cmX165cmX85cm(Equipment wooden case size) 85cmX90cmX125cm(lift warehouse wooden box size) |
| Machete machine system support language: | Simplified Chinese and English |
| Software Computer operating platform: | Windows7 or later |
The whole machine is equipped with 8-axis integrated high-speed control system, the whole machine has 8 sets of servo drive, Ethernet transmission control, fast and stable.
Feeding adopts double clip knife, front and back teeth Taiwan TBI screw, equipped with two upper and lower silver guide rails, the machine is powered by advanced Domestic lechuang brand high precision servo drive, equipped with Japan Xinbao high precision reducer, high efficiency and stability.
Pneumatic part adopts Japan SMC cylinder, Taiwan original Yadeke solenoid valve, Taiwan series of sensors and Panasonic laser position sensor.
The combined power adopts refined turbine motor and energy saving motor, low dryness sound and energy saving.
